High-Performance, Energy-Efficient Direct Attached Storage Array
Energy-efficient storage-expansion array that provides the performance to satisfy demanding single- server applications.
- Seamless server expansion for 6Gb/s SAS environments
- Supports performance-intensive applications such as Web server, database and e-mail.
- 6 cm (2.5") small-form-factor (SFF) array, energy-efficient array
Up to twenty four (24) 6 cm (2.5") hot-pluggable SAS Hard Disk Drives (HDDs) at 7200, 10K, 15K rpm and SAS Solid State Drives (SSDs).
6 cm (2.5") SAS HDDs
15,000 RPM 6Gb/s SAS drives available in 73GB and 146GB
10,000 RPM 6Gb/s SAS drives available in 146GB, 300GB and 600GB
7,200 RPM (Nearline) 6Gb/s SAS drives available in 500GB
6 cm (2.5") SAS SSDs*
3Gb/s SSDs available in 150GB
Maximum Capacity (per enclosure)
14.4TB using twenty four (24) 600GB 10K RPM 6Gb/s SAS HDDs
PERC H800 enables expansion to 8 enclosures, 4 per port
More Details on PERC
- Support for the following configurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 11 and a separate connectivity to drives 12 through 23.
- Refer to the PERC RAID Card details for supported Operating Systems
9 cm (3.41")
45 cm (17.57")
55 cm (21.6")
23.31 kg (51 lb) (maximum configuration)
8.61 kg (19 lb) (empty)
- Two fully redundant power supplies; supports DC power
Wattage: AC - 600 W; DC - 700 W
Heat dissipation: AC - 2047 BTU/hr; DC - 2388 BTU/hr
Voltage: 100-240VAC; 48V DC
Amperage: 8.6 A at 100 V, 4.3 A at 240 V
Available Hard Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.2 A at +5V
up to 0.5 A +12V
- Enclosure Management Modules (EMM)
2 EMM modules provide redundant enclosure management capability
Environmental Operating Conditions
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
Supports Fresh Air cooling, up to 35 degrees Celsius
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
PowerVault MD1220 direct-attached, energy efficient storage array that provides the performance to satisfy demanding applications.
Expansion for Performance-Intensive Single-Server ApplicationsPowerVault MD1220 direct-attached storage array is the second generation of Dell's energy-efficient, small-form-factor (SFF), 6 cm (2.5") drive expansion enclosure. The PowerVault MD1220 offers seamless expansion for DellTM PowerEdge servers with PERC H800 Host-RAID adapter, providing IOPs needed to satisfy performance-intensive application. This expansion array can support 24, 6 cm (2.5") SAS hard-disk drives (HDDs) or solid-state drives (SSDs)* in a 2U array and expands up to 8 arrays per adapter, so you don’t have to trade capacity for performance.
Optimizing Performance, Enhancing Security While doubling the Throughput: The PowerVault MD1220 leverages SAS 2.0 technology, which enables double the throughput over previous generation, with a 6Gb/s SAS interface and offers performance optimization with automatic I/O load balancing across redundant paths and enhanced security, over previous generation with new self-encrypting drive (SED) support.
Improved efficiency: The PowerVault MD1220 improves energy efficiency over previous generation, with new 80PLUS(R) Silver Certified power supplies. This enhancement augments the efficiencies already gained with 6 cm (2.5") drives and variable speed fans.
Satisfying Even the Most Performance-Hungry ApplicationsThe PowerVault MD1220 direct-attached storage array storage array offers compelling performance,
- 6Gb/S SAS: With up to 35-percent increase in IOPs and twice the throughput of last-generation arrays, the PowerVault MD1220 can satisfy even the most performance-intensive applications, such as Web hosting, database and e-mail.
- Solid State Drives*: Pair the increased IOPs and throughput of 6Gb/s SAS with support for solid state drives (SSD), which have 3x the IOPs performance over 15K SAS2 drives and offer an ideal solution for applications that rely on random block access.
- Automatic I/O Load Balancing: Further optimizing the performance of the PowerVault MD1220, the PERC H800 Host-RAID adapter has automatic I/O balancing between the server and storage array. The PERC H800 can detect when a single path starts to get saturated and then balance the I/O traffic across both paths.
- The PowerVault MD1220 direct-attached storage array can deliver the speed, performance and reliability to satisfy performance intensive single server applications that store active and frequently changing information.
Your Energy-Conscious StorageThe PowerVault MD1220 is a small-form-factor (SFF) array that helps manage power, heat and space consumption in your data center. In fact, 6 cm (2.5") disks consume up to 50% less power and 70% less space than 9 cm (3.5") drives.
Additionally, the MD1220 power supplies are 80PLUS® Silver Certified, and, with variable-speed, temperature-controlled fans, are designed to deliver optimal performance and energy efficiency
Keeping Your Data Safe
Access and accuracy of your data are key to the success of any business. The PowerVault MD1220 has been engineered to help maximize your uptime and the security of your data.
Redundant Path with I/O Load Balancing: You can rest assured that your data will be available when you need it.Even if a single cable path fails from one port of the PERC H800, you will continue to have access to your data through the second port.
Self-Encrypting Drives (SED): Self-encrypting drives help to ensure that your data is secure with drive-level encryption, so, even if a drive is removed from its storage system or the server it in which it is housed, the data on the drive is encrypted and rendered useless to anyone who attempts to access it without the appropriate security authorization. Additionally, SED supports instant secure erase of drives, which permanently removes data when repurposing or decommissioning drives.
Hot-Swappable Drives: With hot-swappable drives, you can remove and replace drives even when your system is operating. No need to shut down, and no need to reboot: New drives are available right away.
Leveraging the PERC H800 RAID ControllerThe PowerVault MD1220 leverages the PERC H800 Host-RAID adapter with the latest PCI Express 2.0 interface, offering excellent performance for enterprise.
The configuration of the PERC H800 Host-RAID adapter helps to increase reliability and fault tolerance by enabling the software to recognize the entire array as a single unit, regardless of how many disks are activated for storage in the array. With the PERC H800, customers can choose the RAID option that supports their application. The PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.
Dell PowerVault MD1220 storage array is engineered to work optimally with Dell PowerEdge servers. Dell OpenManage™ Storage Manager Software can manage both the external array and internal storage within the server itself.
Streamlining storage management through a single, common interface helps reduce resource load on the system, and is easier to navigate for the user as well. The PowerVault MD1220 utilizing the same 6 cm (2.5") drives as 11th Generation PowerEdge servers, and the same power supplies and fans as the PowerVault MD1200, helping to reduce the number of spares required.
Dell can offer, via Local Partners, a wide range of Services to suit you and your business. Extensions to the parts or exchange warranty, upgrades to any service level required, International warranty, Installation Services, and other competitive items are available. Dell can also offer Custom Factory Integration (CFI) to customise hardware settings and add Asset Services.
Please contact your Local Partner for further information.
Please contact your Local Partner for further information.