This article provides the information on "The Dell 27 Gaming monitor S2716DG will not wake from keyboard or mouse input ".
Users of Dell 27 Gaming Monitors (S2716DG) report that the display will not wake using keyboard or mouse input after the S2716DG display enters the sleep mode. Powering off then powering on the display resolves the issue until the monitor sleeps again.
In order to meet the sleep mode power consumption of 0.5W, the NVidia G-sync module within the S2716DG will be turned off after the monitor enters sleep mode. This state will ignore mouse movement.
There is no issue when the PC is set for sleep mode. Both PC and monitor will wake from sleep with Mouse movement.
Press any of the monitor front panel buttons once and the monitor will recover from sleep.
Power cycling the monitor will also allow the monitor to wake from sleep.
Disable the Monitor Deep Sleep mode if you notice any of the two scenarios mentioned below. Follow the instructions mentioned to ‘Disable the Monitor Deep Sleep Mode.
Disable the Monitor Deep Sleep Mode by following these steps:
If you still have sleep issues with your display continue normal sleep troubleshooting.
You can find out more information about the Dell Gaming S2716DG display in the following article:
最終更新日: 01/30/2018 10:45 AM