Knowledge Base

How to remove the memory on the Alienware M14x R2

How to remove the memory on the Alienware M14x R2
Article Summary:

The following article will show you how to remove the memory on the Alienware M14x R2 system in case of replacement, upgrade or for troubleshooting purposes.

Note: Please bookmark this article as restarts of the computer are recommended during the process to help resolve issues.

Table of Contents:

1.       Safety precautions

2.      Disassembly 

Watch the video tutorial!!


Subscribe to our YouTube channel for more video content!

Safety precautions


-        Turn off the system and any attached peripherals.

-        Disconnect the system and any attached peripherals from AC power.

-        Disconnect any peripherals from the unit.

-        Disconnect any telephone or telecommunications lines from the system.

-        Use a wrist grounding strap and mat when working inside any computer system to avoid electrostatic discharge (ESD) damage.

-        After removing any system component, carefully place the removed component on an anti-static mat.

-        Wear shoes with non-conductive rubber soles to help reduce the chance of being shocked or seriously injured in an electrical accident.



1.       Remove the bottom door from the system.

2.      Remove the battery from the computer

          3.      Locate the Memory compartment


Optical drive and hard drive should not be removed. Image is for reference only


4.     Loosen the two screws securing the Memory cover to the bottom base



5.      Remove the memory cover



6.     Gently push the securing clips away from the memory a few millimeters only. The memory will pop up by itself when it is released.




7.      Remove the memory from the system.



8.     Repeat steps 6 and 7 for the bottom module











Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN145300

Last Date Modified: 07/06/2012 12:00 AM

Rate this content

Easy to understand
Did this article solve your problem?
Send us feedback
Change the CAPTCHA codeSpeak the CAPTCHA code
Enter Captcha Code
There is an error with an entry. Please try again entering your CAPTCHA code.
Feedback shows invalid character, not accepted special characters are <> () \
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.