Consulta de temas

Removing the Fuser Unit on a Dell 5350dn Laser Printer


Article Summary: This article provides information on "Removing the Fuser Unit on a Dell 5350dn Laser Printer".


Table of Contents:
  1. Removing the Fuser Unit on a Dell 5350dn Laser Printer


1.


Removing the Fuser Unit on a Dell 5350dn Laser Printer



To remove the Fuser Unit from the 5350dn Laser Printer for replacement, please follow the guide below:

1. on the top of the 5350dn Printer, please identify the Fuser Wiper cover



2. Squeeze the tab and lift top remove the fuser wiper cover



3. Turn the Printer and open the rear cover

4. with the door open, Identify the fuser door cord on the right hand side



5. turn the cord 90 degrees and remove through the slot (as shown below)



6. with the cord removed and the rear fuser door open, remove the door entirely by lifting from the bottom hinges





7. Identify the two clips on left and right hand side of the internal fuser door and open



8. with the internal fuser door open, identify the clips and push them inwards (they should remain locked in place)



9. use the handle in the centre of the fuser and pull the fuser unit towards you and out of the printer



10. The fuser should now be removed



11. Reverse the process to reinstall the Fuser Unit

If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.



Back to Top

 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN284189

Última fecha de modificación: 03/22/2016 03:33 PM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios muestran caracteres no válidos, los caracteres especiales que no se aceptan son <> () &#92;
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Gracias. Sus comentarios se han enviado.