Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Número del artículo: 000126718


Remove, Clean, and Replace the Feed Rollers on the 2330d or 2330dn Laser Printer

Resumen: Guide to removing, cleaning, and replacing the Feed Rollers on the 2330d or 2330dn Laser Printer.

Contenido del artículo


Síntomas

  1. Switch the printer off
  2. Remove the paper tray
  3. Turn the printer on to its side

    SLN286270_en_US__11389022282040.2330_TYRES_1 
     
  4. Open the blue plastic duplex tray to expose the pickup assembly. If the duplex tray is opened to 90° it will come loose from its mounting points. Only open the tray as far as is shown

    SLN286270_en_US__21389022293946.2330_TYRES_2 
     
  5. Pass the pickup arm through the opening in the duplex tray

    SLN286270_en_US__31389022333994.2330_TYRES_3 
     
  6. Peel the rubber tyres off the pickup assembly wheels

    SLN286270_en_US__41389022348620.2330_TYRES_4 
     
  7. Thoroughly clean and dry the tyres before refitting them to the pickup assembly
  8. If paper feed issues persist after cleaning, fit new or known good tyres if available. If no new or known good parts are available turn the tyres inside out to expose a fresh surface to the paper

    SLN286270_en_US__51389022384355.2330_TYRES_5 
     

 

If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.

Propiedades del artículo


Producto comprometido

Dell 2330d/dn Mono Laser Printer

Fecha de la última publicación

21 feb 2021

Versión

3

Tipo de artículo

Solution