Knowledge Base

How to Troubleshoot Replace Belt Soon 094-422 or Replace Belt 094-911 Errors on the 3130cn / 3130cdn Dell Laser Printer


Table of Contents:

  1. 094-422 Replace Belt Soon
  2. 094-911 Replace Belt

This article provides information on "How to Troubleshoot Replace Belt Soon 094-422 or Replace Belt 094-911 Errors on the 3130cn / 3130cdn Dell Laser Printer"


1. 094-422 Replace Belt Soon

  • The belt unit must be replaced every 100,000 pages, usually along with the fuser and feed rollers as part of a maintenance kit.
  • The error code 094-422 indicates the belt has reached 75,000 page and as a result has 25% life or less remaining.
  • The belt does not need to be replaced immediately and can continue to be used until end of life is reached.
  • Replacement parts may be covered under warranty, please contact Dell Technical Support.

More info can be found in the 3130cn User’s Guide.

Back to Top

2. 094-911 Replace Belt

  • The belt unit must be replaced every 100,000 pages, usually along with the fuser and feed rollers as part of a maintenance kit.
  • The error code 094-911 indicate the belt has reached 100,000 pages and should be replaced immediately. The printer will not operate until the belt unit is replaced.
  • Replacement parts may be covered under warranty, please contact Dell Technical Support.

More info can be found in the 3130cn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



Article ID: SLN286210

Last Date Modified: 11/08/2016 01:36 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.