Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Alienware Area 51 R6 Cannot Upgrade or Clean Install Windows 10 Build 20H1

Summary: Information about Alienware Area 51 R3 and R6 systems with Windows 10 not upgrading to Windows 10 build 20H1 with older versions of Windows 10.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Symptoms

Unable to install Windows 10 build 20H1 or later.

Cause

No cause information.

Resolution

Note: May 19, 2021: The issue is resolved, and Microsoft removed the safe-guard for Windows.


This article contains information about Alienware 51 R6 systems unable to upgrade to or clean install Windows 10 build 20H1. The solution requires a manual update of the Dell system BIOS to version 1.2.0 or later (a download link is at the end of the article).

 
Note: If the system stays on an older BIOS version, the upgrade to Windows 20H2 and later will also be blocked.
 

Unable to Upgrade to Windows 10 Build 20H1

Alienware Area 51 R6 systems cannot upgrade to Windows 10 build 20H1 from earlier versions of Windows 10 (19H2 and earlier).


Windows 10 starts the upgrade process but stops after the system reboots with error: "0xC1900101 - 0x20017 (The installation failed in the SAFE_OS phase with an error during BOOT operation) (Figure 1)."
Alienware Area 51 Windows 10 Error
Figure 1


Windows 10 attempts to roll back to the previous version that was installed on the system. You can also start rollback manually:

 
  1. Power the system off and back on three times.
  2. On the third time, your system boots into the "Advanced Recovery Environment."
  3. Click Advanced Options.
  4. Click Troubleshoot.
  5. Click Rollback.


Unable to Clean Install Windows 10 Build 20H1

Alienware Area 51 R6 systems cannot perform a new install of Windows 10 Build 20H1. When you attempt the installation, Microsoft will present the following message during the setup process (Figure 2):


Windows 10 Setup Needs your Attention Error
Figure 2 - Alienware Area 51 R6 Windows 10 Build 20H1 Your PC is not supported.


Back to Top


Solution

Update the Dell BIOS to version 1.2.0 or later and attempt the upgrade again.
Alienware Area 51 R6 BIOS and Drivers


Back to Top

Article Properties


Affected Product

Alienware Area 51, Alienware Area-51 Threadripper Edition R3 and R6, Alienware Area-51

Last Published Date

02 Jun 2021

Version

5

Article Type

Solution