Knowledge Base

Windows Server: Logical Disks May Show Offline Status in Disk Management After Installation of Windows Server 2008 or 2008 R2


Article Summary: This article provides information about the logical disks appearing offline in Disk Management after installing Windows 2008 or 2008 R2.

Problem:
The logical disks may show "Offline" status in Disk Management after installing Windows Server 2008 or Windows Server 2008 R2.

Discussion:
Microsoft introduced a new policy in the Enterprise and Datacenter editions of Windows Server 2008 and Windows Server 2008 R2. The hard disks on the same bus as the disk on which Windows is installed will use Offline Shared as their default policy to reduce the boot time.

Resolution:
This behavior is normal for the Windows Server 2008 and Windows Server 2008 R2 installation process. Manually set the logical disks in Disk Manager to Online as shown in Figure 1 (English only).

Disk Manager
Figure 1: Disk Manager  


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikel-id: SLN167247

Laatste wijzigingsdatum: 01/08/2015 10:13 AM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.