Knowledge Base

Dell OptiPlex Memory Compatibility Guide



Article Summary: Guide to memory compatibility for currently shipping OptiPlex desktop systems.


Table of Contents :

  1. Memory Speeds
  2. Model Compatibility Matrix

1. Memory Speeds

Some confusion has been created due to the difference in the actual listings for speed ("MHz") and the way memory is described from a sales standpoint ("PC XXXXXX"). The listings below should resolve any confusion.

PC3-6400 800 MHz
PC3-8500 1066 MHz
PC3-10666 1333 MHz
PC3-12800 1600 MHz
PC3-14900 1866 MHz
PC3-17000 2133 MHz

Only showing 4GB?

To fully utilize 4GB or more of memory requires a 64-bit enabled processor and 64-bit operating system. With 32-bit OS, the total amount of available memory will be less than 4GB. The amount less depends on the actual system configuration. See the following Microsoft article: Memory Limits for Windows Releases External Link

Back to Top


2. Model Compatibility Matrix

Note: Best practice is to install memory in pairs of matched memory Size, Speed and Technology. If the memory modules are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance.

Note: DDR3 and DDR3L

Below memory compatibility will be DDR3 unless stated otherwise. (example: DDR3L)

DDR3 is not backward-compatible with DDR2.

DDR3 and DDR3L are socket compatible, however, It is NOT compatible with systems using 4th Generation Intel (Haswell) processors, which exclusively support 1.35V operation for memory.

Example:
System will shutdown early in POST with a specific error code or beep code. Technical Support must verify that the right memory is used on these systems to prevent unnecessary disptaches.

For older legacy systems not listed below please check your system manual for more information on hardware compatibility. http://www.dell.com/support/manuals/

Model Dimm Slots Max Memory Memory Compatibility
OptiPlex 3010 (MT, DT, SSF, USFF) 2 8Gb 1333/1600MHz
OptiPlex 7010 (MT, DT, SFF) 4 16Gb 1333/1600MHz
OptiPlex 7010 (USFF) 2 16Gb 1333/1600MHz
OptiPlex 9010 All-In-One 2 16Gb 1333/1600MHz
OptiPlex 9010 (MT, DT, SFF) 4 32Gb 1333/1600MHz
OptiPlex 9010 (USFF) 2 16Gb 1333/1600MHz
OptiPlex 9020 (MT, SFF) 4 32Gb 1600MHz (DDR3 Non ECC)
OptiPlex 9020 (USFF Micro) 2 16Gb 1600MHz (DDR3)
OptiPlex 3020 (USFF Micro) 2 16Gb 1600MHz (DDR3)
OptiPlex XE2 (MT, SFF) 4 32Gb 1600MHz
OptiPlex 3011 All-In-One 2 8Gb 1333/1600MHz
OptiPlex 9020 All-In-One 2 16Gb 1333/1600MHz (DDR3L memory only)
OptiPlex 790 4 16Gb 1333MHz
OptiPlex 3030 All-In-One 2 16Gb 1600MHz (DDR3L memory Only)
OptiPlex 7020 (MT & SFF) 4 16Gb 1600MHz (DDR3 / DDR3L Non ECC)
OptiPlex 9030 All-In-One 2 16Gb 1600MHz
OptiPlex 7040 (Micro) 2 16Gb 2133MHz (DDR4 Synch DRAM))
OptiPlex 7040 (SFF, MT) 4 64Gb 2133MHz (DDR4)
OptiPlex 5040 (MT) 4 16Gb 1600MHz (DDR3L memory only)
OptiPlex 5040 (SFF) 4 32Gb 1600MHz (DDR3L)
OptiPlex 3040 SFF/MT/Micro 2 16Gb 1600MHz (DDR3L memory only)
OptiPlex 7440 All-In-One 2 16Gb 1600MHz (DDR4 Non ECC)
Note: Voltage

DDR4 improved power efficiency over DDR3 and DDR3L memory technologies. Reducing DDR3L DRAM IO voltage from 1.35 V used to 1.2 V.

Back to Top





Artikel-id: SLN152123

Laatste wijzigingsdatum: 10/26/2017 02:35 AM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.