Base de conhecimento

Rebuild Abort (E1811 - HDD ## Rbld Abrt) is Reported on a Dell PowerEdge™ Server LCD


Article Summary: This article provides information on "troubleshooting E1811 HDD ## Rbld Abrt Errors".


Issue

E1811- HDD ## Rbld Abrt is reported on the server LCD screen.


Answer

To resolve:

Check the Open Manage Server Administrator (OMSA) Alert Log for any alerts about the hard drives:
  • Target Drive Failed (2348 or 2349): Replace the hard drive.
  • Predictive Failure (2094) or SMART error: Replace the hard drive.
  • Source Drive Failed (2347): Attempt to force the failed source drive online to backup any important files or data. If all files are backed up, or the drive cannot be brought online, replace the failed hard drive, recreate the virtual disk, and then restore it from backups.

If OMSA is not installed, run the Dell Diagnostics Test to determine if a source or target drive has failed.
  • Target Drive Failed: Replace the hard drive.
  • Source Drive Failed:: Attempt to force the failed source drive online to backup any important files or data. If all files are backed up, or the drive cannot be brought online, replace the failed hard drive, recreate the virtual disk, and then restore it from backups.

 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID do artigo: SLN156412

Data da última modificação: 07/22/2013 12:00 AM


Classifique este artigo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
Sim Não
Envie seus comentários
O comentário mostra um caractere inválido, os caracteres especiais não aceitos são <> () &#92;
Infelizmente, o nosso sistema de feedback está atualmente desativado. Tente novamente mais tarde.

Obrigado. Seu comentário foi enviado.