Base de conhecimento

How to Install the Optional Hard Drive on the 5330dn Dell Laser Printer


Table of Contents:

  1. Install Hard Drive
  2. Enable Hard Drive in Printer Properties

This article provides information on "How to Install the Optional Hard Drive on the 5330dn Dell Laser Printer"


1. Install Hard Drive

  1. Switch the printer off, disconnect the power and data cables.
  2. Remove the controller card cover.

  3. Align the hard drive connector with the connector on the controller card. Push the hard drive in until it latches in place.

  4. Fasten the hard drive in place using the screws provided.

  5. Replace the controller card cover.

  6. Switch the printer on.
  7. Confirm the hard drive is detected by printing a configuration report.
    • Press the Menu button.
    • Press the Down Arrow until "Report" is highlighted, press Tick/Select to select.
    • Select "Configuration".
    • Configuration report prints.

More info can be found in the 5330dn User’s Guide.

Back to Top

2. Enable Hard Drive in Printer Properties

Instructions below are for Windows 7, the general procedure is similar for other operating systems.

More info can be found in the 5330dn User’s Guide.

  1. Click on the start button. In the search box type "printers".

  2. Select "View Devices and Printers".

  3. Right click on the printer icon, select "Printer Properties".

  4. Select the "Printer" tab.
  5. In the "Printer Option Configuration" section of the dialogue, click the checkbox for "Optional Hard Disk Drive (HDD)".

  6. Click "OK".

More info can be found in the 5330dn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



ID do artigo: SLN265827

Data da última modificação: 08/19/2015 12:35 PM


Classifique este artigo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
Sim Não
Envie seus comentários
Os comentários não podem conter estes caracteres especiais: <>()\
Infelizmente, o nosso sistema de feedback está atualmente desativado. Tente novamente mais tarde.

Agradecemos o feedback.