Knowledge Base

---

The following article is a visual guide to the external ports and features of the E-Port II Dock.

---

Table of Contents:

1. Front View
2. Rear View
3. Left View
4. Right View
5. AC Adapter View
6. Connecting a system to this Dock
7. Disconnecting a system from this Dock

---

1. Front View

(Fig.1 Front View of Dock.)

Back to Top

---

2. Rear View

(Fig.2 Rear View of Dock.)

Back to Top

---

3. Left View

(Fig.3 Left Hand Side View of Dock.)

Back to Top

---

4. Right View

(Fig.4 Right Hand Side View of Dock.)

Back to Top

---

5. AC Adapter View

(Fig.5 130W AC Adapter.)

(Fig.6 240W AC Adapter.)

Back to Top

---

6. Connecting a System to this Dock

(Fig.7 Docking Step 1.)

1. This dock can work off of the Notebooks Battery or you can connect an AC adapter.

2. Have the dock in a location with enough space to support the system once it's docked.

3. If the system has a battery that extends behind the machine, then use the slide at the rear of the dock to adjust the sliding block flush with the battery.

(Fig.8 Docking Step 2.)

4. Push the locking switch at the right hand side of the dock towards the rear of the dock to unlock it. DO NOT try and dock a system with this switch locked.

(Fig.9 Docking Step 3.)

5. Line up the alignment marks on the dock and the system and push firmly down to seat the system on the docking connector. (You should hear a click as it seats in place.)

(Fig.10 Docking Step 4.)

6. You can dock the system while it is turned on, however if you docked it whilst it was off - you can turn the system on by pressing the Power Button on either the system or the Dock.

7. If it's doesn't boot correctly, undock the system and reseat it.

Back to Top

---

7. Disconnecting a System from this Dock

1. Push the lock switch towards the rear of the dock to unlock it.

2. Press the Eject button on the dock to undock it. Lift the system up and away from the dock.

(Fig.11 Un-Docking.)

Back to Top

---