Knowledge Base

Paper Tray Hard to Remove Dell™ Multi-Function Printer 1125 - Product Support Quick Note (PSQN) - 326862




Paper tray is hard to remove on the Dell™ Multi-Function Printer 1125.

By design, the paper tray on the Dell Multi-Function 1125 laser printer fits very snugly into the printer base. This is intended to keep the tray from dislodging accidently or falling out when the printer is moved.



Remove the paper tray from the Dell™ Multi-Function Printer 1125.

Use these steps to remove the paper tray from the Dell Multi-Function Printer 1125:

  1. Remove the tray cover and any paper in the tray (Figure 1).



    Figure 1: Remove the cover and paper from the tray
  2. Position your left hand on the top of the printer and with the right hand, pull firmly from the right side of the tray in the direction of the arrow (Figure 2).



    Figure 2: Brace the printer and firmly pull the tray from the right side as shown



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN38132

Last Date Modified: 06/17/2009 12:00 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.