The following article provides information on how to use the Dell diagnostics on boot if you've reinstalled with Ubuntu Linux on your Dell PC.
This guide takes you through linking the GRUB2 boot loader to the partition that contains the Dell diagnostics from when the system was originally configured in the factory.
It will let you boot to the diagnostics if you are experiencing any hardware issues with your Dell PC.
If you get any errors from these diagnostics, please contact your Technical Support for a resolution.
If you have recently reinstalled your Dell PC with an Ubuntu Linux Operating System (OS) then you will want to read and follow the guide below.
Did your system ship with a Dell Diagnostics Partition installed?
No, it didn't ship with any onboard diagnostics. Then, I'm afraid this guide isn't going to do you any good.
Yes, but you wiped and formatted the whole Hard Drive. Again, I'm afraid if there's no existing partition to link to then this guide isn't going to do you any good.
Yes and the partition is still there. Most of our newer systems, including desktops do ship with this partition. Then please follow the steps below to get this partition working again.
If you're unsure if you had this partition you can check if the partition still exists by running this command in Ubuntu.
Have you already installed the Ubuntu OS on your system?
Yes, then follow step 2 below.
No, then please ensure you don't delete the diagnostics partition when you choose which partitions to delete and which to install to during the install process and then come back and pick up this guide from step 3.
During the install the GRUB program will have run a probe for any other bootable partitions on your Hard Drive. However because the diagnostics partition is a small DOS partition that's formatted in FAT, GRUB will not pick it up. You will need to configure it manually.
You will need to edit the file which defines the custom bootable partitions. /etc/grub.d/40_custom. It should show an entry like the picture below.
Append the lines below to the end of the file.
Update the GRUB2 Menu, using the command below.
Now reboot your system and test if it worked?
Dell DOS Diagnostics should have appeared as the last line in the GRUB2 boot menu and you should be able to boot to it and the diagnostics should run from that point.
Once the diagnostics have run through, the system should reboot to the GRUB2 menu.
Article ID: SLN151665
Last Date Modified: 05/21/2018 03:48 AM