知识库

How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer


Table of Contents:

  1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

This article provides information on "How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer"


1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

  1. Switch the printer off, open the front cover.
  2. Locate the duplex gate.



  3. Locate the gray fuser retention clips.



  4. Slide the fuser unit forward.

  5. Then lift to remove.

Perform the steps in reverse order to reseat or replace the fuser unit.

More info can be found in the 3130cn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



文章ID: SLN284839

上次修改日期: 08/03/2015 02:04 PM


评价此文章

准确性
有用性
易理解性
这篇文章对您有帮助吗?
向我们发送反馈
注释中不得包含以下特殊字符:<>()\
抱歉,我们的反馈系统目前发生故障。请稍后重试。

感谢您提供反馈。