知识库

042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


Article Summary: This article provides Information on 042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


Table of Contents:
  1. 042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


1.

042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


This error may occur if the Printer is overheating.

In order to attempt to resolve this issue, please follow the steps below:
  1. Ensure that the Printer is not being used in an unsuitable environment:
    • Operation Temperature Range: 10°C - 32°C

    • Print Quality Guarantee Temperature Range: 15 °C - 28 °C

  2. If the Printer is within this environmental range, turn off the power on the Printer

  3. Remove the PHD Unit and ensure that all packaging has been removed

  4. Leave the PHD Unit out of the Printer for an extended period to ensure that it has cooled down

  5. Re-insert the PHD Unit and Power the Printer on

  6. If the error recurs after extended use, please try another PDH Unit (if available)

  7. If the error recurs with a working PHD Unit (or none is available), please contact Dell via Twitter to raise a Technical Support issue


Back to Top




文章ID: SLN286274

上次修改日期: 09/28/2016 09:15 AM


评价此文章

准确性
有用性
易理解性
这篇文章对您有帮助吗?
向我们发送反馈
反馈包含无效字符,不接受以下特殊字符:<>() &#92;
抱歉,我们的反馈系统目前发生故障。请稍后重试。

谢谢!反馈已发送。