知识库

How do I test the Display on my OptiPlex 9020 AIO System?



Follow the steps in this article to start the Liquid Crystal Display Built-In Self-Test (LCD BIST) on the Dell OptiPlex 9020 All-in-One (AIO) computer.


How do I test the display on my OptiPlex 9020 AIO System?

Start the Built-In Self-Test

OptiPlex 9020 All-in-One systems have an LCD Built-In Self-Test (BIST) you can activate and run following the steps below:

  1. On the right side of the LCD, there is the power button and 3 additional buttons above the Hard Drive activity LED.
  2. With the system off, press and hold the bottom of the three buttons. While holding the 3rd button, press and release the power button: (Figure 1)
    Pressing 3rd button and power button to start the LCD BIST
    Figure 1. - Pressing 3rd button and power button to start the LCD BIST
  3. The LCD will display solid color screens in RED, GREEN, BLUE, BLACK and WHITE, then a Text Page.

These screens allow you to detect color and distortion defects in the LCD.





文章ID: SLN285194

上次修改日期: 03/12/2018 11:40 AM


评价此文章

准确性
有用性
易理解性
这篇文章对您有帮助吗?
向我们发送反馈
注释中不得包含以下特殊字符:<>()\
抱歉,我们的反馈系统目前发生故障。请稍后重试。

感谢您提供反馈。