Databáze znalostí

Optiplex 755 Error 2000:0111 returned from diagnostics

It has been identified that some Optiplex 755 system owners may get a specific error when running the diagnostics. The error 2000:0111 has been displayed in specific test scenarios.

Table of Contents :

  1. Error While Running Diagnostics
  2. Resolving Error

1. Error While Running Diagnostics

Some Optiplex 755 systems may return the below error in the diagnostics.

*Running MATS test*

Test results: System Error

Error Code: 2000:0111

Msg: CPU 0 : General protection exception occurred at selector 18 physical offset 37a18 map file offset 4da8

This has been seen with BIOS revision A16.

2. Resolving Error

To resolve this error please update the system BIOS to the latest revision.

Visit our Support Site, use the options to select your system model by either auto-detecting, using your service tag or selecting from list. Then select Drivers & Downloads from the menu.

Download and run the latest BIOS file.

Re-run the diagnostics and confirm the error is no longer displayed.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN143012

Datum poslední změny: 10/06/2017 04:26 PM

Zhodnoťte tento článek

Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.