What is the file SMARTDRV.EXE used for? - KB Article - 162255

What is the file SMARTDRV.EXE used for? - KB Article - 162255


What is SMARTDRV.EXE?

SMARTDrive® is a disk cache program that allows your computer to read/write data to the hard disk faster by intercepting system calls. SMARTDrive is loaded by using the SMARTDRV.EXE command in your AUTOEXEC.BAT file or at the command prompt. This command, once loaded, becomes a TSR (Temporary Stay Resident) and creates a disk cache in extended RAM (Random Access Memory) memory.

A disk cache can significantly speed up MS-DOS disk operations and dramatically improve the performance of Windows®. SMARTDRV uses a portion of extended memory to act as a buffer for information. The cache duplicates the information as it reads from the hard drive and stores it in this buffer. When your computer requests a read, the cache checks to see if that information is being held in its buffer. If the requested information is present, SMARTDRV will provide it from RAM rather than going to the disk. If the information is not present, SMARTDRV accesses the hard drive and duplicates the information into the disk cache as it passes it to RAM.

SMARTDrive can also perform double buffering, which provides compatibility for hard-disk controllers (usually older SCSI controllers) that cannot work with memory provided by EMM386 or Windows running in 386 enhanced mode. To use double buffering, load the device driver in your CONFIG.SYS file. SMARTDRV will not load after Windows starts. It will only load when Windows is not loaded; therefore, you would have to exit Windows to load SMARTDRV, if it was not loaded prior to Windows.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN49383

Datum poslední změny: 11/14/2010 12:00 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.