Databáze znalostí

Do not flash Venue 11 Pro 713x systems with older touch firmware





This article provides the information on "Do not flash Venue 11 Pro 713x systems with older touch firmware".


Touch Panel Firmware Patch .

Dell has shipped Venue 11 Pro tablets with LCD and touch panels from multiple vendors. As a result, Dell has released several different touch firmware patches for these panels.

A recent panel change was determined not to be compatible with older touch firmware patches, so a universal firmware was created to work with all panels. Unfortunately, the older touch firmware patches that some customers had previously downloaded are not compatible with the newer panel.


Use only the MOST CURRENT firmware patch.

It is especially important to device users that use an imaging process to ensure that the most current drivers and especially the touch panel firmware update are incorporated into any images prior to imaging the device. All users should be advised to delete any older touch firmware patches and only use the version below, which is compatible with all panel variants.

Dell Venue 11 Pro 7130 and 7139 Sharp / Samsung Touch Panel Firmware Patch Version v1.0.5.100, A01 was the current firmware as of 11 September 2015.

If an older panel firmware is flashed onto a newer system, the user may notice failure to complete the Power On Self-Test (POST).

Other possible issues that could arise are:

  • Intermittent touch functionality
  • No touch function of the display
  • Touch failures in certain panel zones of the display

If you can still interact with the system (even with an external mouse and/or keyboard), you should be able to resolve the issue by flashing the universal firmware above.

Systems in a No POST state should be returned to the service depot to be recovered.



ID článku: SLN299055

Datum poslední změny: 09/15/2017 09:52 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.