Databáze znalostí

The Trusted Platform Module (TPM) on this computer doesn’t work with the current BIOS, BitLocker error





This article provides the information on "The Trusted Platform Module (TPM) on this computer doesn’t work with the current BIOS, BitLocker error".


Trusted Platform Module (TPM) error after imaging.

A Venue 11 Pro 7140 user reported they encountered a BitLocker error that states: "The Trusted Platform Module (TPM) on this computer doesn’t work with the current BIOS. Contact the computer manufacturer for BIOS upgrade instructions."

This issue occurs if the system is imaged with a Legacy BIOS configuration.

NOTE: While it was reported on a Venue 11 Pro 7140, this issue may occur on any UEFI capable system.

Image system with UEFI BIOS configuration.

For systems requiring BitLocker functionality, the system must have the operating system image installed with the BIOS configured in the default Unified Extensible Firmware Interface (UEFI) mode.

When the operating system is installed in the Legacy BIOS mode for legacy support, BitLocker functionality is not available.

For more information on the requirements for BitLocker see: BitLocker Frequently Asked Questions (FAQ)



ID článku: SLN299058

Datum poslední změny: 09/15/2017 09:46 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.