Databáze znalostí

How to reset the BIOS on a Dell PowerEdge Server?


This article explains how to restore the BIOS defaults settings on a Dell PowerEdge Server. This procedure may be valid for other Dell products.
  1. Power on the system.
  2. While the blue Dell logo is visible, press the < F2 > key to enter the System Setup.




  3. Enter the "System BIOS" section




  4. Click on the button "Default" in the low end corner.



  5. A popup will ask the confirmation of action, press "Yes".

  6. The BIOS settings are now reset.
If it doesn't work try the following sequence:
  • Press the < Num Lock > key, and verify that the Num Lock light is on.
  • Press the < Caps Lock > key, and verify that the Caps Lock light is on.
  • Press the < Scroll Lock > key, and verify that the Scroll Lock light is on. The lights on the keyboard should all be illuminated as in Figure 1.
  • Press the < Alt >+< F > keys at the same time. The system will beep as the setup defaults are restored.






Need more help?
Find additional PowerEdge and PowerVault articles

Visit and ask for support in our Communities

Create an online support Request


ID článku: SLN302725

Datum poslední změny: 07/26/2016 09:52 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.