Databáze znalostí

Why do I receive the error “Sorry, this system is engaged”, when trying to Telnet into the NAS system? - KB Article - 130515




Use Fabric View to terminate exisitng connection.

To resolve the issue, perform the following steps:

  1. Log in to Fabric View (WebUI).
  2. Click the Telnet button in the upper right hand corner.
    A window appears that displays the active session, identifying which user is logged in. It will also display the time that the account has been idle.
  3. Click the Abort Session button to terminate the currently logged in user.
    A new telnet session will start allowing another login.



System Engaged Error Occurs When Connecting to NAS System with Telnet.

The error Sorry, this system is engaged occurs when trying to Telnet into the NAS system. There is another active Telnet session with the NAS system.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN37323

Datum poslední změny: 08/25/2010 12:00 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.