Databáze znalostí

Enabling Non-Dell Toner Mode on the Dell 3110cn, 3115cn or 3130cn Color Laser Printer


3110cn 3115cn 3130cn  

  1. Press the Menu button.

  2. Press the button until Admin appears, then press the button.

  3. Press the button until Maintenance appears, then press the button.

  4. Press the button until Non Dell Toner appears, then press the button.
    Off is the default setting.

  5. Press the button to select On, then press the button.

  6. Press the Cancel button several times to get back to the main screen.
 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID článku: SLN77449

Datum poslední změny: 07/30/2013 12:00 AM


Zhodnoťte tento článek

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
Ano Ne
Zašlete nám svůj názor
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
Je nám líto, ale náš systém zpětné vazby je v současné době mimo provoz. Zkuste to později.

Děkujeme za váš názor.