Videnbase

Cleaning the Streak 5 Device


Article Summary: This article provides information on cleaning your Streak 5 device.

Table of Contents:

  1. Cleaning the Streak 5 Screen and Body
  2. Cleaning the Streak 5 Battery Contacts



1. Cleaning the Streak 5 Screen and Body
  1. Do not use water, window or monitor cleaner (Cathode Ray Tube or LCD), to clean your Streak 5 device.




  2. Use a dry, clean, lint free soft cloth (Terry Cloth or Microfiber Cloth is best), to wipe the screen and body of your Streak 5 device (when dried material is present, slightly dampen a small section of the cloth to remove the dried material).


Back to Top

2. Cleaning the Streak 5 Battery Contacts
Note:
The Streak device will not boot until the battery charge level reaches 10%. From 0% to 10%, you will be unable to turn on the display for more than a second and unable to get the device to boot. Make sure the battery has been charging for 20-30 minutes using the Dell A/C charger.
  1. Remove the back cover (Figures 1 & 2).

    Figure 1: Removing the Back Cover, Step 1


    Figure 2: Removing the Back Cover, Step 2



  2. Remove the battery.



  3. Wipe the connectors on both the battery and in the device itself with a cotton swab.



  4. Re-insert the Battery (Figure 3).

    Figure 3: Inserting the Battery



  5. Replace the back cover (Figures 4 & 5).

    Figure 4: Replacing the Back Cover, Step 1


    Figure 5: Replacing the Back Cover, Step 2

Back to Top
 


Artikelnummer: SLN113301

Sidste ændringsdato: 07/28/2011 12:00 AM


Bedøm denne artikel

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
Ja Nej
Send os feedback
Kommentarer må ikke indeholde følgende specialtegn: <>()\
Vi beklager, men feedbacksystemet er nede i øjeblikket. Prøv igen senere.

Mange tak for din feedback.