Videnbase

XPS 13 USB 3.0 Ports Stop Working after Windows Update



Article Summary: This article provides information on "XPS 13 (L321x) USB 3.0 Ports Stop Working after Windows Update".


XPS 13 (L321x) USB 3.0 Ports Stop Working after Windows Update

After Windows updates, the USB 3.0 ports on an XPS 13 (L321X) will stop working. It appears that there is a Fresco Logic xHCI Controller driver being pushed, and this causes the failure. The Fresco Logic website recommends only installing drivers from the OEM provider. This is due to the fact that the driver has to be based on the chipset of the system as well.


Insure that the driver version A02 on the Dell website is the driver being used

Make sure the A02 driver version XPS-L321X_Chipset_Driver_R9WKR_WN_3.5.46.0_A02.exe posted on the Dell website is the one being used, and that no updates are applied unless they come from Dell. The easiest solution is to do a driver rollback within the operating system if there has been an unplanned driver update.

If the choice for Windows Update Settings has been selected for "Install updates automatically", the problem may reoccur. It is best to choose an option like "Download updates but let me choose whether to install them" so that Windows updates will not be installed automatically.





Artikelnummer: SLN171999

Sidste ændringsdato: 08/20/2015 01:35 PM


Bedøm denne artikel

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
Ja Nej
Send os feedback
Feedback indeholder ugyldige tegn. Specialtegnene <> () &#92; accepteres ikke.
Vi beklager, men feedbacksystemet er nede i øjeblikket. Prøv igen senere.

Mange tak. Din feedback er sendt.