Knowledge Base

Troubleshooting Sound Problems on your Alienware Systems



Troubleshooting Sound Problems on your Alienware Systems

The following article will show you how to troubleshoot sound issues on your Alienware system.

Supported Systems:

Alienware Laptops Alienware Desktops

Run a Sound Card Diagnostic First


Recommended troubleshooting

If the device you are looking for is not shown on the list do the following:

  1. Play a music file or a video with audio
  2. Check the volume is not on Mute

    • Click on the icon at the lower right hand corner of your screen
    • Click on the icon to mute and unmute the speakers

      Muted Not Muted

      Note: A green bar should go up and down, as shown on the picture above, when audio is being played, if the audio is mute or the speakers are disconnected this bar will turn gray.

  3. Set the correct playback devices

    • Right Click on the icon at the lower right hand side of your screen
    • Click Playback devices

      All your playback devices such as speakers, digital outputs or your TV should be listed here

    • Right Click on the device you want to play audio
    • Click Set as Default Device
    • Right Click on the icon at the lower right hand side of your screen
    • Click Playback devices
    • Right Click in the middle of the screen
    • Click Show Disabled Devices and Show Disconnected Devices
    • Right Click on the playback device you need
    • Click Enable

  4. Check your Speaker/Headphone configuration

    • Right Click on the icon at the lower right hand side of your screen
    • Click Playback devices
    • Right Click on your speakers
    • Click Configure Speakers
    • Follow the setup wizard

  5. Uninstall the Audio Driver from Programs and Features inside Windows Control Panel

    It will be called Realtek Audio, Sound Blaster Recon 3Di or Alienware Audio depending on yuour system model

  6. Make sure you BIOS is up to date. Follow our article on How to run a BIOS update on an Alienware Computer
  7. Download and install the latest Audio Driver from our Drivers Page
  8. Try headphones or other set of speakers
  9. Check that your speakers are properly connected. Check the specifications for your system in out article Top Solutions for your Alienware article
  1. Check your Speaker/Headphone configuration

    • Right Click on the icon at the lower right hand side of your screen
    • Click Playback devices
    • Right Click on your speakers
    • Click Configure Speakers
    • Follow the setup wizard

  2. Make sure you BIOS is up to date. Follow our article on How to run a BIOS update on an Alienware Computer
  3. Download and install the latest Audio Driver from our Drivers Page
  4. Try headphones or other set of speakers
  5. Check that your speakers are properly connected. Check the specifications for your system in out article Top Solutions for your Alienware article

Run a Microphone Diagnostic First

  1. Right Click on the icon at the lower right hand side of your screen
  2. Click Recording devices
  3. Right Click on your microphone or headset
  4. Click Set as default device
  5. Right Click on your microphone or headset
  6. Click Properties
  7. Go to the Levels tab
  8. Adjust the levels to your needs and clikc Ok when you are done

Back to Top


Can't find what you are looking for?
Reach out to our experts on:

Twitter AlienwareServices Facebook Alienware Arena



Article ID: SLN117556

Last Date Modified: 04/03/2018 11:27 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.