How to Replace the Imaging Unit on the B3465dn / B3465dnf Dell Laser Printers
Warning: Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.
- Press the button on the right side of the printer, and then open the front door (Figure 1).
- Pull the toner cartridge out using the handle (Figure 2).
- Lift the blue handle, and then pull the imaging unit out of the printer (Figure 3).
- Unpack the new imaging unit, and then shake it (Figure 4).
- Remove all packing materials from the imaging unit (Figure 5).
- Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer (Figure 6).
- Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer (Figure 7).
- Close the front door.
If these steps do not correct the problem, please contact Dell Technical Support.
More information can be found in the User Guide
for your model printer, or visit our Printer Support site
for additional information, troubleshooting articles and videos.
Purchase Toner and other Dell Laser Printer Supplies
It is recommended that only Dell Branded toner, drums, transfer rollers or other consumables are used in our laser printers. Dell cannot guarantee compatibility or the print quality of any 3rd party consumables.
Back to Top