Consulta de temas

How to restore a Windows 7 Factory Image on your Dell PC



This article provides information you need to confirm you need to recover your system and how to carry it out on a Dell PC.


Table of Contents:

  1. You need to recover your Dell PC to the Factory Image
  2. A step by step guide to the Factory Restore Process

1. You need to recover your Dell PC to the Factory Image

Recovering a factory image is where you access a partition on your hard drive that restores your PC to the way it originally shipped from the Dell Factory.

Note: Please be aware this option is only used as a last resort, as it will wipe your entire HDD (Hard Disk Drive) of all your programs, settings and information. Please remember that once your system has crashed, it is too late to attempt a backup. Backups should be done on a regular schedule while your PC is in a working condition.
  1. Does your System have a Factory Restore Image?

    1. Yes, then please follow the guide below.

    2. No, then this guide will be not be of any use to you. Please locate your Re-install media and use a re-install guide instead for your particular operating system. Please use the links below for more information.

  1. Have you exhausted all other options before doing this restore?

    1. Yes, then please carry on with the steps in the next section of the guide.

    2. No, then please try the other options or contact your Technical Support for further help.


Back to Top


2. A step by step guide to the Factory Restore Process

  1. Start your PC.

  2. For Windows Vista and Windows 7 tap the F8 key as the computer starts, until the Advanced Boot Options menu appears on the screen and carry on through the remaining steps.

  3. If these steps do not work for you, please see section 1 question 1 again. Otherwise continue with this guide.

  1. Press the DOWN ARROW cursor key to select Repair Your Computer on the Advanced Boot Options menu and then press the ENTER key.

  2. Specify the language settings that you want and then click Next.

  3. Log in as a user who has administrative rights and then click OK.

  4. Click Dell Factory Image Restore.

Note: If you do not see the Dell Factory Image Restore option on this menu, then your system currently doesn't have a factory image to restore from. Please refer back to section 1 step 1.
  1. In the Dell Factory Image Restore window click Next.

  2. Click to select the check box for Yes to re-format the hard drive and restore the system software to the way you received it from the factory.

  3. Click Next. The computer is restored to the way it shipped.

  4. When the restore operation is completed click Finish to restart the computer.

  5. At this point you setup the system as if it was brand new. If the issue that caused you to do the restore continues at that point, get in touch with your Technical Support.

Note: If you have Windows 8, 8.1 or 10 installed then please use the appropriate guide from the links below :


Back to Top





ID del artículo: SLN151763

Última fecha de modificación: 09/14/2017 05:07 AM


Valorar este artículo

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
No
Envíenos sus comentarios
Se ha introducido un carácter no válido en los comentarios. Los caracteres especiales no aceptados son los siguientes: <> () &#92;
Lo sentimos. El sistema de envío de comentarios no está operativo en estos momentos. Vuelva a intentarlo más tarde.

Gracias. Sus comentarios se han enviado.