Consulta de temas

Install a 550 sheet feeder on the Dell 2330d or 2330dn laser printer


Article Summary: How to install a 550 sheet feeder on the Dell 2330d or 2330dn laser printer

Table of Contents:
  1. Fit the Optional Feeder to the Printer
  2. Enable the Feeder in the Printer Properties



1.

Fit the Optional Feeder to the Printer


  1. Switch the printer off
  2. Unpack the feeder and remove and packing material or tape
  3. Place the feeder where the printer will be installed
  4. Align the holes in the printer with the positioning posts on the optional feeder, then lower the printer into place



  5. Switch the printer on

Back to Top


2.

Enable the Feeder in the Printer Properties

  1. Open the Printer Properties dialogue
  2. On the Install Options tab highlight "550-sheet drawer" then click Add and OK




Back to Top


If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.
 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID del artículo: SLN286396

Última fecha de modificación: 01/27/2014 12:00 AM


Valorar este artículo

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
No
Envíenos sus comentarios
Los comentarios no pueden contener caracteres especiales: <>()\
Lo sentimos. El sistema de envío de comentarios no está operativo en estos momentos. Vuelva a intentarlo más tarde.

Gracias por sus comentarios