Consulta de temas

016-398 Restart Printer Error on the LCD Panel [ Dell™ 3110cn, 3115cn Printer ]


  1. Cycle power on the Printer.
    1. Turn the printer off.
    2. Wait 10 seconds.
    3. Turn the printer on.
    4. Determine if the issue still occurs.

  2. Reset the NVRAM on the Printer.
    3115cn 3110cn
    1. When Ready to Print appears on the LCD, press the Down button until Setup appears, and then press the Select button or the Menu button.
      Setup displays.
    2. Press the Down button until Admin Menu is displayed, and then press the Select button.
    3. Press the Down button until Maintenance is displayed, and then press the Select button.
    4. Press the Down button until Initialize NVM is displayed, and then press the Select button.
    5. Press the Down button until User Section is selected, and then press the Select button.
    6. If Are you sure? message appears on the LCD, press the Select button to confirm.
    7. If the printer does not restart automatically, power off the printer and power back on.
    8. Repeat steps 1, 2, 3 and 4.
    9. Press the Down button until System Section is selected, and then press the Select button.
    10. Perform steps 6 and 7.
    1. Press the Menu button.
    2. Press the Down button until Admin Menu appears, and then press the Select (Select) button.
    3. Press the Down button until Maintenance appears, and then press the Select (Select) button.
    4. Press the Down button until Reset Default appears, and then press the Select (Select) button.
      Are you sure? appears.
    5. Press the Select (Select) button.
      Initializing and Restart Printer appears.
    6. Power off the printer and power back on.

  3. If the same problem still persists, Contact Technical Support.
 


ID del artículo: SLN289772

Última fecha de modificación: 07/22/2012 12:00 AM


Valorar este artículo

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
No
Envíenos sus comentarios
Los comentarios no pueden contener caracteres especiales: <>()\
Lo sentimos. El sistema de envío de comentarios no está operativo en estos momentos. Vuelva a intentarlo más tarde.

Gracias por sus comentarios