Consulta de temas

The Dell™ PowerVault™ 110T LTO May Fail Diagnostic Tape Tests. - Technical Tip - 156760


Test the PV110T LTO tape drive, use the latest version of the Tape Tools Diagnostics (version 1051 or greater).

Solution

To test the PV110T LTO tape drive, use the latest version of the Tape Tools Diagnostics (version 1051 or greater).

File Download

  1. Browse to Dell Support.
  2. Click the link for Downloads.
  3. Search for the latest version of the Tape Tools Diagnostics under Applications for your system.

    NOTE: For more information about searching for and downloading files from Dell, click the Help link on the Downloads page.



Additional information about the PowerVault 110T.

The PowerVault (PV) 110T LTO tape drive may erroneously fail the Dell Diagnostics tape test.

The diagnostic tests will fail if an old version of the diagnostics is used.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID del artículo: SLN49248

Última fecha de modificación: 11/14/2010 12:00 AM


Valorar este artículo

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
No
Envíenos sus comentarios
Los comentarios no pueden contener caracteres especiales: <>()\
Lo sentimos. El sistema de envío de comentarios no está operativo en estos momentos. Vuelva a intentarlo más tarde.

Gracias por sus comentarios