Tietämyskanta

Windows stop error 7A and stop error F4 due to hard disk drive failure



Article Summary: This article provides information on a Windows stop error 7A or F4 caused by Hard Disk Drive Failure


Issue:

A hard disk drive failure occurs causing the RAID volume to go into a degraded state and a stop error 7A or stop error F4 occur as a result of the hard disk drive failure.

Solution:

1. Reseat the hard disk drives, reseat the controller and monitor.

2. Perform chkdsk /r on the RAID volume.

3. Run diagnostics on the hard disk drives and controller and replace as necessary.

Additional Information:

Event ID 1001 is logged in the System event log.

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 12.08.2013 11:23:04
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa800644ab30, 0xfffffa800644ae10, 0xfffff80001be07b0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 031214-68266-01

Review of the memory dump files using Debugging Tools for Windows will result in output similar to the following.

BugCheck 7A, {fffff6fc40040128, ffffffffc000000e, 6454cbe0, fffff88008025000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36c1a )
Debugging Details:
------------------
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.
DISK_HARDWARE_ERROR: There was error with disk hardware

BugCheck F4, {3, fffffa8006332b30, fffffa8006332e10, fffff80001b8e7b0}
----- ETW minidump data unavailable-----
Probably caused by : csrss.exe
CRITICAL_OBJECT_TERMINATION (f4)




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikkelin tunnus: SLN290732

Muokattu viimeksi: 08/28/2014 08:46 AM


Arvostele tämä artikkeli

Tarkka
Hyödyllinen
Helppo hahmottaa
Oliko tästä artikkelista hyötyä?
Kyllä Ei
Lähetä meille palautetta
Kommenteissa ei voi olla seuraavia erikoismerkkejä: <>()\
Pahoittelumme, palautejärjestelmä ei ole nyt käytettävissä. Yritä myöhemmin uudelleen.

Kiitos palautteestasi.