Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Número del artículo: 000142532


Precision Rack 7910 Workstation – Error UEFI0067 after post

Es posible que este artículo se traduzca automáticamente. Si tiene comentarios sobre su calidad, háganoslo saber mediante el formulario en la parte inferior de esta página.

Contenido del artículo


Síntomas



Customers may report that they are seeing the error UEFI0067 Messaage A PCIe link training failure is observed in arg1 and device link is disabled towards the end of POST in Precision R7910 Rack Mounted Workstation. 

This issue is seen due to loose contact between the network / video cards in the PCI slots primarily because they are seated incorrectly.

Resolución



No Hardware Replacement is required. 

Flashing the BIOS without the PCI cards in the slot will resolve the error. 

Troubleshooting Steps:
  1. Shutdown the System.
  2. Remove all the PCI Cards from the slots. 
  3. Restart the system and Flash the BIOS.
  4. Replace the cards in the respective slots. 

For more information, refer to SLN295913 : Precision R7910 Rack Mounted Workstation : A Visual Guide 

Propiedades del artículo


Producto comprometido

Precision Rack 7910

Fecha de la última publicación

10 abr 2021

Versión

4

Tipo de artículo

Solution