Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Article Number: 000120221

How to enable routing on the Dell EMC Networking 2401 VRTX I/O Module thru the GUI

Article Content

Instructions


This article explains how to enable routing on the 2401 VRTX IO Module


The 2401 supports static routing capabilities. It does not support routing protocols such as RIP, or OSPF.
To enable routing capabilities on the 2401 module for the VRTX, perform the following.

 
Note: Changing the mode from Layer 2, to Layer 2 + Static Routing, will force the switch to lose its configuration and need to be reconfigured. Be sure to save any configuration for reference if needed.
 
  1. Log into the CMC Web access using an IE browser
  2. Navigate to Chassis Overview > I/O Module Overview
  3. Click Launch I/O Module GUI
  4. Log into the 2401 Web GUI in Advanced mode
  5. Navigate to System > General > System routing Mode
  6. Drop down the menu to Layer 2 + Static Routing
  7. Click Apply to make the change and automatically reboot the I/O module.
The I/O module will then reboot and be under Layer 2 + Static Routing mode. Re-apply any configuration needed and add the static routes as desired.

Article Properties

Affected Product

POWEREDGE VRTX

Last Published Date

21 Feb 2021

Version

3

Article Type

How To

Back to Top