知識庫

How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer


Table of Contents:

  1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

This article provides information on "How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer"


1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

  1. Switch the printer off, open the front cover.
  2. Locate the duplex gate.



  3. Locate the gray fuser retention clips.



  4. Slide the fuser unit forward.

  5. Then lift to remove.

Perform the steps in reverse order to reseat or replace the fuser unit.

More info can be found in the 3130cn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



文章 ID: SLN284839

上次修改日期: 08/03/2015 02:04 PM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。