知識庫

Cleaning the CTD Sensor on a Dell 2155cn/cdn Laser Printer


Article Summary: This article provides Information on Cleaning the CTD Sensor on a Dell 2155cn/cdn Laser Printer


Table of Contents:
  1. Cleaning the CTD Sensor on a Dell 2155cn/cdn Laser Printer



1.

Cleaning the CTD Sensor on a Dell 2155cn/cdn Laser Printer


The CTD Sensor measures the consistency of Toner on each printed page. During general usage an error may be displayed on the Printer's LCD Display advising "Clean CTD Sensor" or "CTD is Dirty".

This generally occurs when Toner traces have been left on the sensor and the printer is unable to read the information from the sensor.

If a CTD error message is related, please follow the guide below for instruction on cleaning the CTD Sensor:




  1. Ensure that the printer is turned off

  2. Pull the standard 250-sheet tray out of the printer about 200mm

  3. Hold the standard 250-sheet tray with both hands, and remove it from the printer

  4. Push the side button to open the front cover

  5. Open the belt unit


  6. Clean the CTD sensor inside the printer with a clean dry cotton swab

  7. Close the front cover

  8. Insert the standard 250-sheet tray into the printer, and push until it stops

  9. Re-start the Printer and verify that the error has now cleared

  10. If the error is still displayed, after thoroughly cleaning the CTD please contact Dell Technical Support via the Twitter button below


Back to Top


If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.




文章 ID: SLN286252

上次修改日期: 08/03/2016 09:42 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
意見反應中有無效的字元,不接受的特殊字元如下 <> () &#92;
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您。您的意見已送出。