知識庫

What tape devices are supported in a Storage Area Network (SAN) environment using a Dell™ PowerVault™ storage device? - Technical Tip - 161861


What tape devices are supported in a Storage Area Network (SAN) environment using a Dell™ PowerVault™ storage device?

In order to attach a SCSI tape device to a Storage Area Network (SAN), you must use the Dell™ PowerVault™ 35F bridge for the connection. The PowerVault 35F only supports High Voltage Differential (HVD) devices, therefore you must use HVD tape solutions in a SAN Environment.

Supported

  • PowerVault 130T DLT Tape Library
  • PowerVault 120T DLT 4000 Autoloader
  • PowerVault 120T DLT 7000 Autoloader

Not Supported

  • PowerVault 120T DLT1 Autoloader
  • PowerVault 120T DDS3 Autoloader
  • PowerVault 120T DDS4 Autoloader



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN108896

上次修改日期: 11/14/2010 12:00 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
意見反應中有無效的字元,不接受的特殊字元如下 <> () &#92;
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您。您的意見已送出。