知識庫

CMC - "Maximum number of sessions already in use" Reported by CMC


Article Summary: This article provides information on "Maximum number of sessions already in use" reported by CMC.



Question

When logging onto the PowerEdge M1000e Chassis Management controller (CMC) web interface, the message, "Maximum number of sessions already in use" may be reported.


Answer


The problem was addressed in iDRAC firmware version 1.50.

To obtain the latest iDRAC firmware go to Dell Remote Access Controller - DRAC / iDRAC.


Workaround:

The user can change the console redirection configuration by selecting Java in place of ActiveX, which
will redirect the shift key properly. If the user does not have the option of using Java, the iDRAC firmware can be flashed
back to version 1.20. The problem is not seen in this version of firmware.






 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN285804

上次修改日期: 10/18/2013 12:00 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
意見反應中有無效的字元,不接受的特殊字元如下 <> () &#92;
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您。您的意見已送出。