Knowledge Base

Article Summary:

This article provides information on "PowerVault Tape Drive or Library - ML6000 Tape Library: How-to find the Library Firmware Revision".

Table of Contents:

1. Operator Panel (Front Display)
2. Web Interface (RMU)

---

Issue 1.

Operator Panel (Front Display)

The ML6000 Tape Library firmware can be checked in the
following ways:

• Operator Panel > About

See the following image below to see an example of
the Operator Control Panel:



Figure 1 - ML6000 Operator Control Panel

---

Issue 2.

Web Interface

The other method is the recommended method, and it is through
the Web Interface or Remote Management Unit:

• Reports > System Information
• Reports > About

See the following images below as examples:



Figure 2 - ML6000 Web Interface - Reports Menu



Figure 3 - ML6000 Web Interface - System Information



Figure 4 - ML6000 Web Interface > About Menu



Figure 5 - ML6000 Web Interface > About > About ML6000 

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.