Knowledge Base

Docking Spacer Designed to Accommodate the Latitude 7000 Series & Latitude E5x50 Series Portable Systems

This article provides information on "The Docking Spacer Designed to Accommodate the Latitude 7000 Series (E7x40, E7x50) & Latitude 5000 (E5x50) Series Portable Systems in the E-Port Advanced Port Replicator".

What do I need to do to dock my Latitude 5000/7000 series notebook on my E-Port?

Latitude 5000/7000 Series system users note that the spacing adjuster on the E-Port Advanced Port Replicator (APR) does not extend far enough to assist when docking a 5000/7000 Series Latitude notebook.

Install the Docking Spacer

Due to a change in chassis design, the docking port on a Latitude 5000/7000 Series is much closer to the edge of the chassis than in previous Latitude models.

To compensate for this change, there is a docking spacer, Dell Part XJD0R, to ease the docking process on these systems.

Article ID: SLN285232

Last Date Modified: 10/24/2017 09:55 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.