기술 문서

PowerVault Tape Drive or Library - ML6000 Tape Library: How-to find the Library Firmware Revision


Article Summary: This article provides information on "PowerVault Tape Drive or Library - ML6000 Tape Library: How-to find the Library Firmware Revision".

Table of Contents:
  1. Operator Panel (Front Display)
  2. Web Interface (RMU)


Issue 1.


Operator Panel
(Front Display)


The ML6000 Tape Library firmware can be checked in the
following ways:
  • Operator Panel > About
See the following image below to see an example of
the Operator Control Panel:

Figure 1 - Operator Control Panel

Figure 1 - ML6000 Operator Control Panel



Issue 2.


Web Interface


The other method is the recommended method, and it is through
the Web Interface or Remote Management Unit:
  • Reports > System Information
  • Reports > About

See the following images below as examples:

Figure 2 - ML6000 Reports Menu

Figure 2 - ML6000 Web Interface - Reports Menu

Figure 3 - ML6000 System Information

Figure 3 - ML6000 Web Interface - System Information

Figure 4 - ML6000 Reports Menue > About Menu

Figure 4 - ML6000 Web Interface > About Menu

Figure 4 - ML6000 > About ML6000

Figure 5 - ML6000 Web Interface > About > About ML6000
 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

문서 ID: SLN156486

최종 수정일: 08/09/2013 12:00 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.