기술 문서

XPS 13 USB 3.0 Ports Stop Working after Windows Update



Article Summary: This article provides information on "XPS 13 (L321x) USB 3.0 Ports Stop Working after Windows Update".


XPS 13 (L321x) USB 3.0 Ports Stop Working after Windows Update

After Windows updates, the USB 3.0 ports on an XPS 13 (L321X) will stop working. It appears that there is a Fresco Logic xHCI Controller driver being pushed, and this causes the failure. The Fresco Logic website recommends only installing drivers from the OEM provider. This is due to the fact that the driver has to be based on the chipset of the system as well.


Insure that the driver version A02 on the Dell website is the driver being used

Make sure the A02 driver version XPS-L321X_Chipset_Driver_R9WKR_WN_3.5.46.0_A02.exe posted on the Dell website is the one being used, and that no updates are applied unless they come from Dell. The easiest solution is to do a driver rollback within the operating system if there has been an unplanned driver update.

If the choice for Windows Update Settings has been selected for "Install updates automatically", the problem may reoccur. It is best to choose an option like "Download updates but let me choose whether to install them" so that Windows updates will not be installed automatically.





문서 ID: SLN171999

최종 수정일: 08/20/2015 01:35 PM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
피드백 내용 중 유효하지 않은 문자가 있습니다. <> () &#92;는 허용되지 않는 특수 문자입니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

감사합니다. 피드백이 전송되었습니다.