기술 문서

How to Set Paper Size and Type on the 3130cn / 3130cdn Dell Laser Printer


Table of Contents:

  1. Set on the Front Panel
  2. Set in the Printing Preferences Dialogue

This article provides information on "How to Set Paper Size and Type on the 3130cn / 3130cdn Dell Laser Printer"


1. Set on the Front Panel

For the Multipurpose Feeder.

  1. Press the Menu button.
  2. Press the Down arrow until Tray Settings is visible. Press Tick/Select to select.
  3. Select MPF.
  4. Select MPF Mode.
  5. Select Driver Specified.

For Tray 1 or 2.

  1. Press the Menu button.
  2. Press the Down arrow until Tray Settings is visible. Press Tick/Select to select.
  3. Select Tray 1 or Tray 2.
  4. Select Paper Type.
  5. Select the appropriate paper type from the available options. See the print media specs if you are unsure which option to select.
  6. Press the Left Arrow to go back a step in the menu.
  7. Select Paper Size.
  8. Select Auto.

More info can be found in the 3130cn User’s Guide.

Back to Top

2. Set in the Printing Preferences Dialogue

For the Multipurpose Feeder.

  1. Open the Printing Preferences dialogue.
  2. Set the Paper Source to MPF.

  3. Set the Paper Size and MPF Paper Type to match the media physically loaded. Click OK.

For Tray 1 or 2.

  1. Open the Printing Preferences dialogue.
  2. Set the Paper Source to Tray 1 or Tray 2.

  3. Set the Paper Size and Paper Type to match the media physically loaded. Click OK

More info can be found in the 3130cn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



문서 ID: SLN284906

최종 수정일: 08/03/2015 02:31 PM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.