기술 문서

M1000e Power Consumption Number Does Not Scale with Efficiency


Article Summary: This article provides information on M1000e power consumption number does not scale with efficiency.



Question

Problem: On a PowerEdge M1000e™ the AC blade consumption displayed on the GUI doesn’t take into account more efficient PSU modes afforded by the Dynamic Power Supply Engagement (DPSE) power optimization function.

Discussion: Chassis Management Controller (CMC) GUI power readings use fixed conversion efficiency, 85.3%, while a dynamic efficiency is calculated and delivered to iDRAC for power plotting that varies between 73.2% and 91.2%. The GUI readings don’t take DPSE efficiencies into account.


Answer

Do not replace hardware. The value of GUI scaling is modest for the user.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

문서 ID: SLN285553

최종 수정일: 11/06/2013 12:00 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.