기술 문서

042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


Article Summary: This article provides Information on 042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


Table of Contents:
  1. 042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


1.

042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


This error may occur if the Printer is overheating.

In order to attempt to resolve this issue, please follow the steps below:
  1. Ensure that the Printer is not being used in an unsuitable environment:
    • Operation Temperature Range: 10°C - 32°C

    • Print Quality Guarantee Temperature Range: 15 °C - 28 °C

  2. If the Printer is within this environmental range, turn off the power on the Printer

  3. Remove the PHD Unit and ensure that all packaging has been removed

  4. Leave the PHD Unit out of the Printer for an extended period to ensure that it has cooled down

  5. Re-insert the PHD Unit and Power the Printer on

  6. If the error recurs after extended use, please try another PDH Unit (if available)

  7. If the error recurs with a working PHD Unit (or none is available), please contact Dell via Twitter to raise a Technical Support issue


Back to Top




문서 ID: SLN286274

최종 수정일: 09/28/2016 09:15 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
피드백 내용 중 유효하지 않은 문자가 있습니다. <> () &#92;는 허용되지 않는 특수 문자입니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

감사합니다. 피드백이 전송되었습니다.