기술 문서

Latitude E7240 Removal Guide for the SD Memory Card, Battery, Sim Card, Bottom Cover and mSATA Card


Table of Contents :

  1. SD Memory Card Removal
  2. Battery Removal
  3. Sim Card Removal
  4. Bottom Cover Removal
  5. mSATA Card Removal


This article provides information on removing components from a Latitude E7240.


1. SD Memory Card Removal

1. Pre-Removal Instructions Before removing the SD Memory Card:

The assembly and disassembly steps shown on SD Memory Card blank is applicable to any other SD Memory Card.
  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

2. Locate the SD Memory Card slot.





3. Press in the SD memory card and release.





4. Slide the SD memory card out of the system.





Back to Top


2. Battery

1. Pre-Removal Instructions Before removing the Battery:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

2. Slide the battery release latch into the unlock position.





3. Remove the battery from the system.






Back to Top


3. Sim Card

1. Pre-Removal Instructions Before removing the Sim Card:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets
  • Remove the Battery

2. Locate the Sim Card slot.





3. Push to release the phone SIM from the slot.





4. Pull out the phone SIM from the slot.






Back to Top


4. Bottom Cover

1. Pre-Removal Instructions Before removing the Bottom Cover:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

  • Remove the Battery

2. Remove the two screws securing the Bottom Cover in place.





3. Slide the Bottom Cover towards the front of the system.



4. Remove the Bottom Cover.




Back to Top


5. mSATA Card Removal

1. Pre-Removal Instructions Before removing the mSATA Card:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

  • Remove the Battery and Bottom Cover.

2. Locate the mSATA card




3. Remove the single screw securing the Mini SSD.



3. Remove the Mini SSD from the system.





Return to the Latitude E6420 & E6420 ATG Teardown/Removal Index


Back to Top





문서 ID: SLN289397

최종 수정일: 12/05/2016 08:14 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.