기술 문서

Handling guide for docking the Venue 11 Pro



Handling guide for docking the Venue 11 Pro


Docking the Venue 11 Pro

  • DO NOT tilt the Venue forward towards yourself
  • DO NOT release the Venue until it touches the supporting stand
  • DO NOT use any force should it not slide in properly, instead lift it straight up, check the connectors for any obstacles and start over
  • Make sure the docking station is on a horizontal, flat surface
  • Hold the Venue with both hands at the sides in landscape orientation
  • Plug the Venue at a 90° angle to the desk surface
  • Tilt the Venue backwards until it touches the supporting stand


Undocking the Venue 11 Pro

  • DO NOT tilt the Venue forward over the 90° angle
  • DO NOT use any force when tilting
  • Grab the Venue with both hands on the sides
  • Gently tilt the Venue forward until a maximum of 90° angle to the desk surface
  • Lift the Venue straight up





Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

문서 ID: SLN295100

최종 수정일: 04/28/2015 11:25 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.