기술 문서

Verifying Driver Signatures in Dell CAB Files



Users have reported issues with unsigned driver errors when using CAB files downloaded from Support.Dell.com. This will happen most often with customers attempting to use the CAB files for sysprep or System Center Configuration Manager (SCCM).




Unsigned driver messages will halt installation during sysprep, or SCCM deployment if unsigned driver warnings are enabled in either program. In most cases, these errors are related to sysprep or SCCM, as all the drivers in the Support.Dell.com CAB files are signed. If a user requests the signature status of a driver in the CAB files needs to be verified, it can be accomplished with the CAB file and an archive tool that can open CAB files, such as the freeware program 7-Zip.

The process below will be detailed using a CAB file downloaded from Support.Dell.com site, and assumes 7-Zip is installed.

  1. Right click the CAB, highlight the 7-Zip option, and click "Extract to". This creates a folder with all the files from the CAB.
  2. In the extracted folder, navigate to the driver that needs to be verified, and locate the INF file for that driver and Operating System.
  3. Move the driver files to a compatible system with the required hardware and operating system for a test installation.
  4. Manually install the driver by going to device manager, entering the properties of the device the driver is for, and selecting "Update Driver".
  5. Manually select the .inf file to force the driver update.
  6. If the driver is unsigned, a warning from Windows will appear (The unsigned driver warning is enabled in Windows by default). If this message does not appear, the driver has been signed.

*** HELPFUL LINK ***

7-Zip



문서 ID: SLN80328

최종 수정일: 08/14/2017 11:01 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
피드백 내용 중 유효하지 않은 문자가 있습니다. <> () &#92;는 허용되지 않는 특수 문자입니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

감사합니다. 피드백이 전송되었습니다.