기술 문서

Connect the W5300n Printer to the Network

1. Verify that the printer is turned off and is unplugged from any power sources.

2. Connect the printer to the server using a USB or parallel cable (Figure 1).

NOTE:

You can use only one of the cable connections, either USB or parallel cable—NOT both.

Figure 1 - Cable Connections

NOTE:

If you are using a parallel cable it must be IEEE-1284 compliant.

3. Connect the power cable to the printer and to a grounded outlet.

4. Ensure that the server is turned on.

5. Turn the printer on.
   The operator lights cycle while the printer warms up.
   The Microsoft Plug and Play Wizard appears.

6. Complete the Microsoft Plug and Play Wizard.

---

Install the W5300n Printer Drivers

1. Insert the Drivers and Utilities CD into the server.
   The Wizard automatically searches for an appropriate driver.

2. Scroll through the list of drivers until X:\drivers\win-2000\dkaaalda.inf is selected in the location column, where X is the letter of your CD drive.

3. Click the Next button.

4. Click the Finish button.

---

Configure the Print Queue for the W5300n Printer

1. Click the Start button.

2. Click the Run button.
   The Run window appears.

3. In the Open: box, type the following text:
   X:\setup.exe
   where X is the letter of your CD drive.

4. Click Install the printer on the network.
   The Dell W5300n Laser Printer Installation window appears.

5. Click the Next button.

6. Click the server or system name that will share the printer with other computers.

7. Click the Next button.

8. Click to select Install the software and Install the User's Guide on the server.

9. Click the Next button.

10. Click to select Share the printer on this server.

11. Create a share name you want to use for the PCL driver and PostScript driver.

NOTE:

Make the share name obvious so the clients can easily find the printer when browsing for shared printers.

12. Click the Next button.

13. Verify that Choose an existing port for the printer connection is selected.

14. Select the port that corresponds to the hardware port selected when the printer was connected to the server.

15. Specify a port name.

16. Type in the printer IP address.

17. Click the Finish button.

18. Print a test page to ensure that the software is correctly installed.

19. Click the Finish button to exit.

---

Install the W5300n Drivers for Each Client

1. Click the Start button.

2. Click the Run button.
   The Run window appears.

3. Click the OK button.

4. Click Install the printer on the network.

5. Click the Next button.

6. Click One or More Client computers that will share the printer.

7. Click the Next button.

8. Type the Administrator user name and password.

9. Specify which client systems are allowed to print to the Dell W5300n printer.

NOTE:

Browse or type in each client's computer name or IP address. You can specify as many clients as necessary.

10. Click the Next button.

11. Click to select the software or documentation you want your users to have access to.

12. Select the Universal Network Connection (UNC) port.

13. Type in the port name \\Computer Name\PrinterShareName.

NOTE:

To find out the computer name: Right-click the My Computer icon. Left-click Properties. Click the Network Identification tab for Windows 2000, or the Computer Name tab for Windows XP.

14. Click the Finish button.

15. Click the Finish button.

16. Print a test page to ensure that the software is correctly installed.

---

Dell™ 프린터 추가 정보

이 문서에서 제공되는 내용 이상의 추가 지원이 필요한 경우 Dell 지원 센터의 고객 서비스 상담원과 이메일을 주고받거나 채팅 할 수 있습니다.

---

 

빠른 팁(Quick Tips) 콘텐츠는 매일 문제를 해결하는 Dell 지원 전문가가 직접 게시합니다. 신속한 게시를 위해, 빠른 팁에는 개발 중이거나 성공적인 문제 해결을 위해 보류 중인 솔루션이나 대안의 일부만 포함되어 있을 수 있습니다. 이러한 빠른 팁은 Dell에서 검토, 확인 및 승인되지 않았기 때문에 적절한 주의를 가지고 사용되어야 합니다. Dell은 고객이 빠른 팁의 절차나 조언을 수행함으로써 발생할 수 있는 모든 손실(데이터 손실, 이익 또는 매출의 손실을 포함하되 이에 국한되지 않음)에 대해 책임을 지지 않습니다.